danni66

A biochemical incubator is a high-precision thermostatic device with heat and cold control, which needs to be calibrated when conducting culture experiments or testing. 1. Specific calibration of metrology Institute When a special instrument is placed in the incubator for about 4 hours, the temperature at the time point set at the interval will be automatically recorded and compared with the temperature set in the incubator, as the basis for verification results. 2. Internal calibration of the laboratory It is common practice for the laboratory to purchase calibrated thermometers and place them in the incubator. The temperature set by the incubator is checked once a day and recorded. The biochemical incubator should be installed in a dry and ventilated room away from direct sunlight. The distance between the equipment and the wall must be more than 10CM.

 As a powerful manufacturer in China, several constant temperature incubators are popular in the market. So what are the characteristics of these incubators in terms of material structure? PX series incubator is made of high-quality cold-rolled steel plate with environmental protection electrostatic spraying, and the inner tank is made of SUS304 stainless steel, which is more suitable for the environmental requirements of acid-base and anti-corrosion of a scientific research laboratory. Advanced inner chamber preheating technology, the inner wall of the inner chamber is preheated by the three side ring stainless steel heating pipe, which makes the temperature rise faster and the temperature stability better (beat the inner tank). You can also choose the LCD screen, touch screen, segmented screen, temperature limiter, etc DNP series outer box is made of high-quality cold-rolled steel plate with environmental protection electrostatic spraying, and the inner tank is made of mirror 2...

Do cell anaerobic experiment, need cell anaerobic culture to do a follow-up, had better use to the anaerobic incubator . Process: After the medium is prepared, it is separately packed in the screw mouth test tube, and the screw cap is released for high-pressure sterilization at 121 ℃ for 20 minutes. After sterilization, it is quickly put into the sampling chamber of the anaerobic incubator which has been inflated and replaced for one hour. After vacuuming and filling with nitrogen, the medium is taken into the operation room by opening the inner door (the main purpose is that the sterilization process of the medium is also dissolved out of it). Screw the screw cap tightly, and then carry out the corresponding dilution and mixing operation in the operating room. Then screw the lid tightly, take out the anaerobic tank, seal with sealing glue, and roll the test tube, and then culture at 55 ℃. Control table operation of the anaerobic incubator , Click the "set" key to enter into ...

Kenton Laboratory has very many series of incubators, constant temperature incubators, biochemical incubators, mold incubators, constant temperature and humidity incubators, and so on. So what is the difference between several popular thermostatic incubators in the control panel? 303 thermostatic incubator DNP series thermostatic incubator PX series thermostatic incubator PX, DNP and 303 series of  thermostatic incubator  control panel difference (with three kinds of laboratory put a small picture in the upper left corner for instructions, LCD and digital display meter to be powered to display the picture before the effect), PX series standard with LCD screen, DNP series have LCD or digital display meter, 303 series with digital display meter or pointer meter. The LCD temperature control accuracy is ± 0.1 degrees, with RS485 microcomputer interface function, network management, and monitoring can be realized. The controllable accuracy of the digital display is ±0.5 degrees. A...

The artificial climate incubator is a high-precision hot and cold thermostat with illumination and humidification function, providing users with an ideal artificial climate experimental environment. It can be used for plant germination, seedling, tissue, microbial culture; feeding of insects and small animals; determination of BOD for water analysis and artificial climate test for other uses. It is ideal test equipment for production and scientific research departments such as biological genetic engineering, medicine, agriculture, forestry, environmental science, animal husbandry, and aquatic products. Kenton ’s artificial climate incubator PQH series have a competitive price, widely applications and muti-functions, which are suitable and welcomed for markets of all over the world. It's Quality compressor with delay protection function; without fluorine refrigerant high efficient, more energy saving; built-in tempered glass viewing window and high -capacity intelligent humidific...