How to use the disinfection chamber?
The use of disinfection chambers in different industries and disinfection cabinets of different manufacturers is different. Take Kenton Instrument as an example, their use is like this, you can refer to it.
1. System self-tuning (some sterilizers have this effect)
When the temperature control effect is not satisfactory, the system self-tuning can be performed. During the self-tuning process, the temperature will have a large overshoot. Users should fully consider this factor before performing system self-tuning. In the non-setting state, press and hold the “Shift / Auto-tuning” key for 6 seconds to enter the system auto-tuning program. The “AT” indicator flashes. After the auto-tuning ends, the indicator stops flashing. Best system PID parameters, parameter values are automatically saved. During the system auto-tuning process, press and hold the “Shift / Auto-tuning” key for 6 seconds to terminate the auto-tuning process. During the system self-tuning process, if there is an upper deviation over-temperature alarm, the "ALM" alarm lamp will not light up, and the buzzer will not sound, but the heating alarm relay will automatically turn off. The "Set" key is invalid during the system auto-tuning process. Regardless of whether there is a constant temperature time setting in the system self-tuning process, the lower row of the controller display window always displays the temperature setting value.
2. Put the sterilized things in the normal operation, close the door of the box, turn on the power, click the "Set" button to enter the temperature setting state, the prompt "SP" is displayed in the lower row of the display window, and the temperature set value is displayed in the upper row. (The first digit value flashes), you can modify it to the required setting value by shifting, increasing, and decreasing; then click the "setting" button to exit this setting state, and the modified setting value is automatically saved. In this setting state, if no key is pressed within 1 minute, the controller will automatically return to the normal display state.
E-mail : kenton@kentonchina.com
1. System self-tuning (some sterilizers have this effect)
When the temperature control effect is not satisfactory, the system self-tuning can be performed. During the self-tuning process, the temperature will have a large overshoot. Users should fully consider this factor before performing system self-tuning. In the non-setting state, press and hold the “Shift / Auto-tuning” key for 6 seconds to enter the system auto-tuning program. The “AT” indicator flashes. After the auto-tuning ends, the indicator stops flashing. Best system PID parameters, parameter values are automatically saved. During the system auto-tuning process, press and hold the “Shift / Auto-tuning” key for 6 seconds to terminate the auto-tuning process. During the system self-tuning process, if there is an upper deviation over-temperature alarm, the "ALM" alarm lamp will not light up, and the buzzer will not sound, but the heating alarm relay will automatically turn off. The "Set" key is invalid during the system auto-tuning process. Regardless of whether there is a constant temperature time setting in the system self-tuning process, the lower row of the controller display window always displays the temperature setting value.
2. Put the sterilized things in the normal operation, close the door of the box, turn on the power, click the "Set" button to enter the temperature setting state, the prompt "SP" is displayed in the lower row of the display window, and the temperature set value is displayed in the upper row. (The first digit value flashes), you can modify it to the required setting value by shifting, increasing, and decreasing; then click the "setting" button to exit this setting state, and the modified setting value is automatically saved. In this setting state, if no key is pressed within 1 minute, the controller will automatically return to the normal display state.
E-mail : kenton@kentonchina.com
评论
发表评论