Environmental chamber several experimental sample placement points

Environmental chamber with many users put in samples due to the result of the experiment is not the standard operation is not accurate, its applicable temperature experiment box up and down to stop the experiment time put on the sample, there is a clear rule under the Environmental chamber manufacturer Kenton instrument is summary about how to correctly put sample time for you!

1, liquid test products in the Environmental chamber must be filled with the corresponding container, and it is best not to exceed 2/3 of the container, to avoid liquid overflow.

2, chamber volatile, flammable, and explosive items to stop putting into the experimental box to stop the experiment, conventional equipment has no explosion-proof function. If we must stop such experiments, we must indicate with consumer manufacturers before ordering equipment and request consumer manufacturers to stop some special corrections to the equipment, such as explosion-proof, etc.

3. Rubber experimental products in the Environmental chamber need to be placed under the sample with a bottom plate or plate, so as to prevent the sample from touching the sample shelf after high-temperature ablation, which is not conducive to the later cleaning and maintenance.

4, Environmental chamber sample placement position: under normal conditions, the sample is placed in the middle of the upper and lower temperature test box, neither covering the above air duct nor can be placed at the bottom of the equipment. According to the sample size, quantity, weight of the interval between the adjustment of the test stand to stop placing.

5. The sample volume of the Environmental chamber is best occupied 1/3 of the volume of the studio. Once it exceeds the volume range, it may affect the air duct circulation of the upper and lower temperature experiment chamber and affect the balance of the equipment, so as to meet the requirements of the experiment.

Environmental chamber


评论

发表评论

此博客中的热门博文

What incubator should I use for fungi?

图片
There are many different types of incubators and the choice of the incubator should depend on what is being cultured. If the microorganism to be cultured is aerobic, then a normal incubator is sufficient; if it is anaerobic, then you need to buy an anaerobic incubator; if it is algae or fungi, it is better to have a light incubator. A light incubator is a piece of high-precision constant temperature equipment with light function; a light incubator is a special constant temperature incubation device for the cultivation of bacteria, molds, microorganisms, and breeding tests, especially practical for biological engineering, medical research, agriculture, and forestry science, aquaculture, animal husbandry and other fields engaged in scientific research and production use of the ideal equipment.　 The main technical parameters of the fungal incubator in the microbiology room of the laboratory require 1: Temperature requirements: 2 ~ 48 c, the temperature inside the incubator temperature u
阅读全文

Laminar flow Cabinet architecture introduction

图片
Laminar Flow Cabinet Clean Bench, also known as laminar flow Cabinet, can be mainly divided into two- person single, single side double side, horizontal vertical, etc. The structure is divided into the box, table, bracket, support foot, exhaust pipe, HEPA filter, pre-filter, etc.   Laminar flow cabinet design should have sufficient strength and stiffness, the weight should be light under the premise of good stability, the joints should be tight, according to the needs of the support foot can be self-locking structure universal wheel, but for the high requirements of seismic workbench without support feet and universal wheel, the operating area of the working surface can be made independent of the box platform. The inner surface of the single table is made of three sides of the wall. The wall surface is smooth and the joint is sealed. The glass and metal connection parts should also be sealed. The negative pressure air duct should be designed so that the air duct, plenum, filter, and su
阅读全文

The Control system is the core of the constant temperature and humidity chamber

图片
The Control system is the core of the constant temperature and humidity chamber , it determines the temperature rise rate of the text chamber, precision, and other important indicators. Now the controller of the test chamber mostly adopts PID control, but also a few adopts PID and fuzzy control phase combination control mode. Because the control system of the thermostatic oscillator basically belongs to the category of software, and this part in the use of the process, generally there will be no problems. In the constant temperature and humidity chamber refrigeration principle diagram, we introduced the temperature and humidity chamber refrigeration system several important components of the working path. So how do these components work? The refrigerant is adiabatically compressed to a higher pressure by the compressor, and the work is consumed to raise the exhaust temperature. After that, the refrigerant isothermally exchanges heat with the surrounding medium through the refrigerant c
阅读全文