How to clean the stainless steel surface of light incubator?

The light incubator is made of stainless steel. Different machines have different requirements on how to clean stainless steel. The stainless steel surface of the light incubator must be cleaned and maintained regularly to prolong its service life. Kenton Instrument tells you how to clean the incubator.

1. The grease, oil, and lubricating oil on the stainless steel surface of the light incubator shall be cleaned with a soft cloth, and then cleaned with neutral detergent or ammonia solution or special detergent.

2. If there is dust on the stainless steel surface of the light incubator and dirt is easy to remove, it can be washed with soap, weak detergent, or warm water.

3. Illuminate the trademark and film on the stainless steel surface of the incubator at a constant temperature, wash it with warm water and weak detergent, and scrub it with alcohol or organic solvent.

4. There are rainbow lines on the stainless steel surface of some light incubators, which are caused by excessive use of detergent or oil, which can be washed away with warm water neutral detergent.

5. Bleaching agents and various acids are attached to the stainless steel surface of the intelligent illumination incubator. Rinse it with water immediately, soak it with ammonia solution or neutral carbonated soda solution, and wash it with neutral detergent or warm water.

6. Rust caused by dirt on the stainless steel surface of the plant light incubator can be washed with 10% nitric acid or grinding detergent, or with special washing drugs.

Correct maintenance methods are beneficial to the long-term use and freshness of products. Here, it is emphasized to avoid using bleaching ingredients and abrasive washing liquid, steel balls, grinding tools, etc. In order to remove the washing liquid, clean water should be used to wash the surface after washing.

GZP light incubator



LC thermostatic light incubator



评论

发表评论

此博客中的热门博文

What incubator should I use for fungi?

图片
There are many different types of incubators and the choice of the incubator should depend on what is being cultured. If the microorganism to be cultured is aerobic, then a normal incubator is sufficient; if it is anaerobic, then you need to buy an anaerobic incubator; if it is algae or fungi, it is better to have a light incubator. A light incubator is a piece of high-precision constant temperature equipment with light function; a light incubator is a special constant temperature incubation device for the cultivation of bacteria, molds, microorganisms, and breeding tests, especially practical for biological engineering, medical research, agriculture, and forestry science, aquaculture, animal husbandry and other fields engaged in scientific research and production use of the ideal equipment.　 The main technical parameters of the fungal incubator in the microbiology room of the laboratory require 1: Temperature requirements: 2 ~ 48 c, the temperature inside the incubator temperature u
阅读全文

Laminar flow Cabinet architecture introduction

图片
Laminar Flow Cabinet Clean Bench, also known as laminar flow Cabinet, can be mainly divided into two- person single, single side double side, horizontal vertical, etc. The structure is divided into the box, table, bracket, support foot, exhaust pipe, HEPA filter, pre-filter, etc.   Laminar flow cabinet design should have sufficient strength and stiffness, the weight should be light under the premise of good stability, the joints should be tight, according to the needs of the support foot can be self-locking structure universal wheel, but for the high requirements of seismic workbench without support feet and universal wheel, the operating area of the working surface can be made independent of the box platform. The inner surface of the single table is made of three sides of the wall. The wall surface is smooth and the joint is sealed. The glass and metal connection parts should also be sealed. The negative pressure air duct should be designed so that the air duct, plenum, filter, and su
阅读全文

The Control system is the core of the constant temperature and humidity chamber

图片
The Control system is the core of the constant temperature and humidity chamber , it determines the temperature rise rate of the text chamber, precision, and other important indicators. Now the controller of the test chamber mostly adopts PID control, but also a few adopts PID and fuzzy control phase combination control mode. Because the control system of the thermostatic oscillator basically belongs to the category of software, and this part in the use of the process, generally there will be no problems. In the constant temperature and humidity chamber refrigeration principle diagram, we introduced the temperature and humidity chamber refrigeration system several important components of the working path. So how do these components work? The refrigerant is adiabatically compressed to a higher pressure by the compressor, and the work is consumed to raise the exhaust temperature. After that, the refrigerant isothermally exchanges heat with the surrounding medium through the refrigerant c
阅读全文