Can I print data from a Humidity chamber?
Usually, some customers will ask if the constant temperature and humidity chamber can print data. Kenton laboratory LRH constant temperature and humidity chamber is able to print data.
Introduced as follows.
1. time window; displays the current time (hours . minutes) in the normal state. Minutes).
2.POWER indicator (power indicator): light indicates that the printer controller has been powered on.
3.OUT indicator (print output indicator): the light indicates that there is print output.
4.RS485 light (PC communication light): the light indicates that the current communication is PC, the printer is not available; the PC monitoring system is available.
5.PRT indicator (printer communication indicator): the light indicates that the printer is currently communicating and the printer is available.
Unavailability of PC-based monitoring systems.
6. key (setting key): in a normal state, click to set the print interval; press and hold for 3 seconds to enter setting state; in setting state, click to switch setting parameters; press and hold for 3 seconds to exit setting state.
7. Key (shift key): click to print the test in the normal state.
Click to switch the setpoint digit in the setting state.
8. key (minus key): decreases the setpoint in the set state.
9. Keys (incremental keys): in the normal state click to switch the communication state.
Increasing the setpoint in the set state.
operation
After power on, the digital tube and indicator light will be fully lit for 3 seconds, then enter into operation state. Time window shows the current time (hours. minutes), POWER indicator is on, PRT indicator is on, the printer will print "Print Test", "Current Date", "Print Test" in sequence. Minutes), POWER indicator light, PRT indicator light, the printer, in turn, to print the "print test", "current date", "current data". After that, the data is printed according to the print interval, and when the date changes, the date is printed.
In the normal state, press the Set key to enter the interval time setting state. The setting range is 10 to 9999 seconds when the setting is complete, then click the set key to exit this state; in a normal state, click the increase key to switch the communication state, the RS485 indicator and PRT indicator will indicate the current communication state; in a normal state, click the shift key, the printer prints the test content.
Introduced as follows.
1. time window; displays the current time (hours . minutes) in the normal state. Minutes).
2.POWER indicator (power indicator): light indicates that the printer controller has been powered on.
3.OUT indicator (print output indicator): the light indicates that there is print output.
4.RS485 light (PC communication light): the light indicates that the current communication is PC, the printer is not available; the PC monitoring system is available.
5.PRT indicator (printer communication indicator): the light indicates that the printer is currently communicating and the printer is available.
Unavailability of PC-based monitoring systems.
6. key (setting key): in a normal state, click to set the print interval; press and hold for 3 seconds to enter setting state; in setting state, click to switch setting parameters; press and hold for 3 seconds to exit setting state.
7. Key (shift key): click to print the test in the normal state.
Click to switch the setpoint digit in the setting state.
8. key (minus key): decreases the setpoint in the set state.
9. Keys (incremental keys): in the normal state click to switch the communication state.
Increasing the setpoint in the set state.
operation
After power on, the digital tube and indicator light will be fully lit for 3 seconds, then enter into operation state. Time window shows the current time (hours. minutes), POWER indicator is on, PRT indicator is on, the printer will print "Print Test", "Current Date", "Print Test" in sequence. Minutes), POWER indicator light, PRT indicator light, the printer, in turn, to print the "print test", "current date", "current data". After that, the data is printed according to the print interval, and when the date changes, the date is printed.
In the normal state, press the Set key to enter the interval time setting state. The setting range is 10 to 9999 seconds when the setting is complete, then click the set key to exit this state; in a normal state, click the increase key to switch the communication state, the RS485 indicator and PRT indicator will indicate the current communication state; in a normal state, click the shift key, the printer prints the test content.
Humidity chamber：
http://en.kentonchina.com/humidity-chamber/20170602/34.html
评论
发表评论