What are the structure and characteristics of the air-operated electric incubator?

The main use of the electric thermostatic incubator is bacterial cell culture, breeding, fermentation, and other research and production, so what are the structure and characteristics of the transport air type electric thermostatic incubator?
Structure and features

The incubator shell is made of the steel plate and the surface of the incubator is painted. The workshop is made of stainless steel plates with air-jacketed heating on the outside. It is characterized by the carbon fiber heating wire spread all over the outer wall of the incubator air sleeve directly on the inside of the incubator for heating, also called five-sided direct heating. The back of the workshop is equipped with air duct forced circulation. This ensures a uniform temperature on all levels of the studio. The inner chamber is designed to be easily cleaned, the shelves are removable and removable for storage, and the shelves are spaced up and down and adjustable. The box has a double door structure. The outer door of the incubator is sealed with magnetic rubber, which is easy to open and operate. The built-in tempered glass inner door with silicone seals increases the seal between the door and the studio. Effectively enhances the insulation of the cabinet workroom. The incubator performance is good and the temperature fluctuation is small.
The incubator temperature controller adopts "fuzzy PID" control, which has the advantages of smaller temperature over-regulation, faster stabilization time, better temperature control accuracy, etc. compared with the traditional PID control method. LCD display mode, constant temperature timing function, display running time mode can be selected, timing unit can be selected minutes or hours; if you select constant temperature timing, you can choose to stop heating output or continue to maintain the current temperature after the end of the timing; after the end of the timing, there are sound and light tips. It has the features of timing function and accurate temperature control, the memory of power failure, and the high precision of temperature control.

评论

发表评论

此博客中的热门博文

What incubator should I use for fungi?

图片
There are many different types of incubators and the choice of the incubator should depend on what is being cultured. If the microorganism to be cultured is aerobic, then a normal incubator is sufficient; if it is anaerobic, then you need to buy an anaerobic incubator; if it is algae or fungi, it is better to have a light incubator. A light incubator is a piece of high-precision constant temperature equipment with light function; a light incubator is a special constant temperature incubation device for the cultivation of bacteria, molds, microorganisms, and breeding tests, especially practical for biological engineering, medical research, agriculture, and forestry science, aquaculture, animal husbandry and other fields engaged in scientific research and production use of the ideal equipment.　 The main technical parameters of the fungal incubator in the microbiology room of the laboratory require 1: Temperature requirements: 2 ~ 48 c, the temperature inside the incubator temperature u
阅读全文

Laminar flow Cabinet architecture introduction

图片
Laminar Flow Cabinet Clean Bench, also known as laminar flow Cabinet, can be mainly divided into two- person single, single side double side, horizontal vertical, etc. The structure is divided into the box, table, bracket, support foot, exhaust pipe, HEPA filter, pre-filter, etc.   Laminar flow cabinet design should have sufficient strength and stiffness, the weight should be light under the premise of good stability, the joints should be tight, according to the needs of the support foot can be self-locking structure universal wheel, but for the high requirements of seismic workbench without support feet and universal wheel, the operating area of the working surface can be made independent of the box platform. The inner surface of the single table is made of three sides of the wall. The wall surface is smooth and the joint is sealed. The glass and metal connection parts should also be sealed. The negative pressure air duct should be designed so that the air duct, plenum, filter, and su
阅读全文

The Control system is the core of the constant temperature and humidity chamber

图片
The Control system is the core of the constant temperature and humidity chamber , it determines the temperature rise rate of the text chamber, precision, and other important indicators. Now the controller of the test chamber mostly adopts PID control, but also a few adopts PID and fuzzy control phase combination control mode. Because the control system of the thermostatic oscillator basically belongs to the category of software, and this part in the use of the process, generally there will be no problems. In the constant temperature and humidity chamber refrigeration principle diagram, we introduced the temperature and humidity chamber refrigeration system several important components of the working path. So how do these components work? The refrigerant is adiabatically compressed to a higher pressure by the compressor, and the work is consumed to raise the exhaust temperature. After that, the refrigerant isothermally exchanges heat with the surrounding medium through the refrigerant c
阅读全文