How to set the temperature and humidity in the constant temperature and humidity chamber?

Some people in the purchase of constant temperature and humidity chamber, for how to set the temperature, encountered difficulties, because the product is different, resulting in the use of the method is also different. Here is how to set the temperature and humidity of the LRH constant temperature and humidity chamber.

1. Temperature control range: 0 ~ 60℃; (humidifying 10 ~ 50℃)

2. Temperature fluctuation tolerance: ±0.5℃ (within the setting range of 10℃ ~ 40℃);

3. Tolerance of temperature uniformity: ±1℃ (within the setting range of 10℃ ~ 40℃);

4. Humidity control range: 50-90%RH (within the setting range of 10℃ ~ 40℃);

5. Humidity fluctuation: ±3%;

6. Power supply voltage: ac 220V/50Hz;

7. Input power: 900W (100L) 1080W (150L) 1100W (250L);

8. Working environment: the ambient temperature is 10~30℃ and the relative humidity is less than 70%;

9. Refrigerant: R134;

For example, set the temperature to 30°C and the humidity to 60%RH.

Operation: click the "set/query" key to enter the setting interface of the first paragraph, hover the cursor over the value of the temperature, and modify the temperature setting value to 30℃; Click the set/query key, hover over the value of humidity, and change the humidity setting value to 60%RH.

When the humidity is set to 0, humidification and dehumidification are not open, can be used as a biochemical chamber.

评论

发表评论

此博客中的热门博文

What incubator should I use for fungi?

图片
There are many different types of incubators and the choice of the incubator should depend on what is being cultured. If the microorganism to be cultured is aerobic, then a normal incubator is sufficient; if it is anaerobic, then you need to buy an anaerobic incubator; if it is algae or fungi, it is better to have a light incubator. A light incubator is a piece of high-precision constant temperature equipment with light function; a light incubator is a special constant temperature incubation device for the cultivation of bacteria, molds, microorganisms, and breeding tests, especially practical for biological engineering, medical research, agriculture, and forestry science, aquaculture, animal husbandry and other fields engaged in scientific research and production use of the ideal equipment.　 The main technical parameters of the fungal incubator in the microbiology room of the laboratory require 1: Temperature requirements: 2 ~ 48 c, the temperature inside the incubator temperature u
阅读全文

Laminar flow Cabinet architecture introduction

图片
Laminar Flow Cabinet Clean Bench, also known as laminar flow Cabinet, can be mainly divided into two- person single, single side double side, horizontal vertical, etc. The structure is divided into the box, table, bracket, support foot, exhaust pipe, HEPA filter, pre-filter, etc.   Laminar flow cabinet design should have sufficient strength and stiffness, the weight should be light under the premise of good stability, the joints should be tight, according to the needs of the support foot can be self-locking structure universal wheel, but for the high requirements of seismic workbench without support feet and universal wheel, the operating area of the working surface can be made independent of the box platform. The inner surface of the single table is made of three sides of the wall. The wall surface is smooth and the joint is sealed. The glass and metal connection parts should also be sealed. The negative pressure air duct should be designed so that the air duct, plenum, filter, and su
阅读全文

The Control system is the core of the constant temperature and humidity chamber

图片
The Control system is the core of the constant temperature and humidity chamber , it determines the temperature rise rate of the text chamber, precision, and other important indicators. Now the controller of the test chamber mostly adopts PID control, but also a few adopts PID and fuzzy control phase combination control mode. Because the control system of the thermostatic oscillator basically belongs to the category of software, and this part in the use of the process, generally there will be no problems. In the constant temperature and humidity chamber refrigeration principle diagram, we introduced the temperature and humidity chamber refrigeration system several important components of the working path. So how do these components work? The refrigerant is adiabatically compressed to a higher pressure by the compressor, and the work is consumed to raise the exhaust temperature. After that, the refrigerant isothermally exchanges heat with the surrounding medium through the refrigerant c
阅读全文