A few tips for curing vacuum oven
Equipment to think well, it must be maintained, otherwise, life is not long, also prone to error. Here are a few tips for curing a vacuum oven.
1. Do not turn the vacuum drying box upside down when handling it.
2. Do not change the set value frequently in use, so as not to affect the control accuracy and service life of the equipment.
3. When the vacuum drying oven is being vacuated, the negative pressure indicator state of the panel vacuum meter should be observed, and the vacuum system should be closed in time when the vacuum pressure value is reached. First, close the vacuum valve switch of the panel, and then turn off the power supply of the vacuum pump. Otherwise, the oil of the vacuum pump may pour into the cabinet workroom and affect the normal use of the product.
4. The machine is equipped with a power switch. If there is any fault during operation, please cut off the power and check whether the control circuit is intact before checking other parts.
Be sure to close the door. If the door is not fully closed, the equipment cannot work normally. When closing the door, please pay attention to the door handle must be lifted upward in the open state, do not force too hard to damage the door lock mechanism.
6, in order to maintain the appearance of the equipment, do not wipe the appearance with corrosive solution, the box can be wiped with dry cloth or alcohol, keep the box clean.
7. When the equipment is not in use, keep the box dry and cut off the power.
8. In order to ensure a uniform temperature in the box, items in the box should not be placed too close and evenly distributed during the experiment, so as to facilitate heat conduction of items in the box.
9. Do not touch the electric heating tube in the preheating chamber of the cabinet. Be careful that the heating temperature may cause damage.
10. Be sure to put the shelf in and push it to the limit of the shelf in the workroom, otherwise, it may cause damage to dry goods due to uneven conduction.
11. Do not lean against the glass door or put improper pressure on it, which may cause harm to personnel.
12. Do not lean against the equipment door to prevent the equipment from tipping over or the door from being damaged, which may cause injury to personnel and damage to the equipment.
13, equipment failure, should ask professional maintenance or contact with the sales department of the plant, users do not arbitrarily dismantle repair.
14, Kenton instrument products implement "three guarantees", from the date of the product sold, within one year if there are quality problems, Kenton instrument factory is responsible for free maintenance (artificial damage and consumables are excluded). Different companies may have different warranties.
1. Do not turn the vacuum drying box upside down when handling it.
2. Do not change the set value frequently in use, so as not to affect the control accuracy and service life of the equipment.
3. When the vacuum drying oven is being vacuated, the negative pressure indicator state of the panel vacuum meter should be observed, and the vacuum system should be closed in time when the vacuum pressure value is reached. First, close the vacuum valve switch of the panel, and then turn off the power supply of the vacuum pump. Otherwise, the oil of the vacuum pump may pour into the cabinet workroom and affect the normal use of the product.
4. The machine is equipped with a power switch. If there is any fault during operation, please cut off the power and check whether the control circuit is intact before checking other parts.
Be sure to close the door. If the door is not fully closed, the equipment cannot work normally. When closing the door, please pay attention to the door handle must be lifted upward in the open state, do not force too hard to damage the door lock mechanism.
6, in order to maintain the appearance of the equipment, do not wipe the appearance with corrosive solution, the box can be wiped with dry cloth or alcohol, keep the box clean.
7. When the equipment is not in use, keep the box dry and cut off the power.
8. In order to ensure a uniform temperature in the box, items in the box should not be placed too close and evenly distributed during the experiment, so as to facilitate heat conduction of items in the box.
9. Do not touch the electric heating tube in the preheating chamber of the cabinet. Be careful that the heating temperature may cause damage.
10. Be sure to put the shelf in and push it to the limit of the shelf in the workroom, otherwise, it may cause damage to dry goods due to uneven conduction.
11. Do not lean against the glass door or put improper pressure on it, which may cause harm to personnel.
12. Do not lean against the equipment door to prevent the equipment from tipping over or the door from being damaged, which may cause injury to personnel and damage to the equipment.
13, equipment failure, should ask professional maintenance or contact with the sales department of the plant, users do not arbitrarily dismantle repair.
14, Kenton instrument products implement "three guarantees", from the date of the product sold, within one year if there are quality problems, Kenton instrument factory is responsible for free maintenance (artificial damage and consumables are excluded). Different companies may have different warranties.
评论
发表评论