Upgraded version of constant temperature drying box, higher security

Thermostatic Drying Oven is Widely used in the process of drying, sterilization, heated storage, heat treatment, and other fields, it is laboratories and research units infrastructure and supporting equipment.


Kenton GX series thermostatic drying oven is high-grade drying oven, it combined the following high technologies:

ALLHEAT™ technology: the advanced cavity preheating technology is the heating elements evenly distributed around the inner chamber, pro-heating of the cavity inner wall, and then through the heat transfer and forced-fan convection, so that the cavity temperature of every point can accurately achieve and maintain setting value, thus ensuring uniform distribution of cavity temperature.

ALLFLOW™ Perfect Air Current Cycling: Perfect for convection, minimum temperature recovery time after opening. reasonable air inlet and outlet duct design, equip with international famous finned motor (no maintenance high durability) ensure an ideal result of sample culture and keep temperature continuous and stable. The wind speed can be adjusted with the fan switch function, ensure the perfect sample culture environment.

ALLSENS™ Programmable PID Control:integrated, dot-matrix LCD display. Chinese and English subtitles, all the parameters can be clear at a glance. User-friendly design display parameters: temperature, air velocity, run time, run/stop.

Pro-Insulation™ Insulation Technology：Based on the effective use of heat as a concept, use complete isolation design between the liner and shell to avoid energy loss due to heat transfer. Adopt Imports of high-density thermal insulation material wrapped liner, effective heating insulation and still stand. Good silicone door seal, isolation type hinge design, equip with buckle door handles, ensure excellent sealability.

Also it uses Excellent Imported Temperature Sensor,this is imported industrial sensor PT100, short response time, low self-heating temperature,and adopts Laboratory of classical color design, international fashion design, arc-shaped design, for highest operational comfort,and integrated design,which contains original outside handle and LCD screen, ergonomic structure, comfortable viewing angle, convenient to open the outside door and operate interface.


评论

发表评论

此博客中的热门博文

What incubator should I use for fungi?

图片
There are many different types of incubators and the choice of the incubator should depend on what is being cultured. If the microorganism to be cultured is aerobic, then a normal incubator is sufficient; if it is anaerobic, then you need to buy an anaerobic incubator; if it is algae or fungi, it is better to have a light incubator. A light incubator is a piece of high-precision constant temperature equipment with light function; a light incubator is a special constant temperature incubation device for the cultivation of bacteria, molds, microorganisms, and breeding tests, especially practical for biological engineering, medical research, agriculture, and forestry science, aquaculture, animal husbandry and other fields engaged in scientific research and production use of the ideal equipment.　 The main technical parameters of the fungal incubator in the microbiology room of the laboratory require 1: Temperature requirements: 2 ~ 48 c, the temperature inside the incubator temperature u
阅读全文

Laminar flow Cabinet architecture introduction

图片
Laminar Flow Cabinet Clean Bench, also known as laminar flow Cabinet, can be mainly divided into two- person single, single side double side, horizontal vertical, etc. The structure is divided into the box, table, bracket, support foot, exhaust pipe, HEPA filter, pre-filter, etc.   Laminar flow cabinet design should have sufficient strength and stiffness, the weight should be light under the premise of good stability, the joints should be tight, according to the needs of the support foot can be self-locking structure universal wheel, but for the high requirements of seismic workbench without support feet and universal wheel, the operating area of the working surface can be made independent of the box platform. The inner surface of the single table is made of three sides of the wall. The wall surface is smooth and the joint is sealed. The glass and metal connection parts should also be sealed. The negative pressure air duct should be designed so that the air duct, plenum, filter, and su
阅读全文

The Control system is the core of the constant temperature and humidity chamber

图片
The Control system is the core of the constant temperature and humidity chamber , it determines the temperature rise rate of the text chamber, precision, and other important indicators. Now the controller of the test chamber mostly adopts PID control, but also a few adopts PID and fuzzy control phase combination control mode. Because the control system of the thermostatic oscillator basically belongs to the category of software, and this part in the use of the process, generally there will be no problems. In the constant temperature and humidity chamber refrigeration principle diagram, we introduced the temperature and humidity chamber refrigeration system several important components of the working path. So how do these components work? The refrigerant is adiabatically compressed to a higher pressure by the compressor, and the work is consumed to raise the exhaust temperature. After that, the refrigerant isothermally exchanges heat with the surrounding medium through the refrigerant c
阅读全文