Is there a problem with the light incubator machine? Quality inspector takes you to troubleshoot

Absolutely pure natural dry goods, light incubators are generally used in laboratories, or industrial, agricultural, scientific research units and so on. The light incubator is a high-precision constant temperature illumination simulation test equipment with refrigeration, heating and illuminance control. It can be used for plant culture, breeding tests, culture, preservation of bacteria, mold, microorganisms, BOD measurement of water body analysis and constant temperature test for other purposes. It is ideal test equipment for scientific research units such as biological genetic engineering, medical treatment, health and epidemic prevention, drug testing, agriculture, animal husbandry, and aquatic products.

As an employee of Kenton Instrument Laboratory Equipment, it is necessary to talk to you about these machine troubleshooting methods.

Sensor failure alarm

1. The temperature sensor is abnormal, check the temperature sensor, model PT100;

2. The humidity sensor is abnormal and checks the humidity sensor.

Temperature rise and fall is less than the set value or very slow

1. Check the electric heating tube;

2. Check if the refrigeration system is normal (the compressor is not running, the refrigeration system is leaking, the condenser fan is not running, the condenser is too dusty);

3. Check if the liner fan is not working and damaged;

No display on the display

1. Check if the incoming plug wire has ~220V;

2. Check if the power switch is turned on;

3. Check if the power switch of the equipment trips, such as tripping, please check the fault according to the wiring diagram.

The light tube is not lit

1. Check if the lighting setting is on or the lighting has been completed in cycles;

2. Check if the lamp or lamp holder is in good condition;

3. Check the fault according to the wiring diagram.


评论

发表评论

此博客中的热门博文

What incubator should I use for fungi?

图片
There are many different types of incubators and the choice of the incubator should depend on what is being cultured. If the microorganism to be cultured is aerobic, then a normal incubator is sufficient; if it is anaerobic, then you need to buy an anaerobic incubator; if it is algae or fungi, it is better to have a light incubator. A light incubator is a piece of high-precision constant temperature equipment with light function; a light incubator is a special constant temperature incubation device for the cultivation of bacteria, molds, microorganisms, and breeding tests, especially practical for biological engineering, medical research, agriculture, and forestry science, aquaculture, animal husbandry and other fields engaged in scientific research and production use of the ideal equipment.　 The main technical parameters of the fungal incubator in the microbiology room of the laboratory require 1: Temperature requirements: 2 ~ 48 c, the temperature inside the incubator temperature u
阅读全文

Laminar flow Cabinet architecture introduction

图片
Laminar Flow Cabinet Clean Bench, also known as laminar flow Cabinet, can be mainly divided into two- person single, single side double side, horizontal vertical, etc. The structure is divided into the box, table, bracket, support foot, exhaust pipe, HEPA filter, pre-filter, etc.   Laminar flow cabinet design should have sufficient strength and stiffness, the weight should be light under the premise of good stability, the joints should be tight, according to the needs of the support foot can be self-locking structure universal wheel, but for the high requirements of seismic workbench without support feet and universal wheel, the operating area of the working surface can be made independent of the box platform. The inner surface of the single table is made of three sides of the wall. The wall surface is smooth and the joint is sealed. The glass and metal connection parts should also be sealed. The negative pressure air duct should be designed so that the air duct, plenum, filter, and su
阅读全文

The Control system is the core of the constant temperature and humidity chamber

图片
The Control system is the core of the constant temperature and humidity chamber , it determines the temperature rise rate of the text chamber, precision, and other important indicators. Now the controller of the test chamber mostly adopts PID control, but also a few adopts PID and fuzzy control phase combination control mode. Because the control system of the thermostatic oscillator basically belongs to the category of software, and this part in the use of the process, generally there will be no problems. In the constant temperature and humidity chamber refrigeration principle diagram, we introduced the temperature and humidity chamber refrigeration system several important components of the working path. So how do these components work? The refrigerant is adiabatically compressed to a higher pressure by the compressor, and the work is consumed to raise the exhaust temperature. After that, the refrigerant isothermally exchanges heat with the surrounding medium through the refrigerant c
阅读全文