KYS Agricultural Drying Oven

Agricultural product drying oven is a piece of general-purpose drying equipment, which is widely used in heating, curing and drying of industrial raw materials such as pharmaceutical, chemical, food, agricultural and sideline products, aquatic products, light industry, and heavy industry.

The drying oven/dryer of agricultural products on the market are generally bulky and heavy, and are inconvenient to transport, install, and occupy space, and the temperature is generally up to 70 degrees.

The KYS series is currently suitable for all customers. It is medium in size and weight, easy to install, transport and easy to operate. In addition, its maximum temperature can reach 150 degrees.

Process: The top of the chamber is equipped with an electric heat element and an air fan; when they are working, it is heated by an electric heat element and air circulation through the fan blower to achieve drying effect; the temperature PID control can ensure temperature uniformity.

The scope of this series’ application is specially designed for agricultural products such as grain and miscellaneous grains. It is very suitable for dehydration of various agricultural and sideline products such as baked fruits, pepper, dried shoots, Chinese medicinal materials, mushrooms, seafood, sausage and bacon, tea, tobacco, nuts, jujube, longan, peanuts, melon seeds, raisins, betel-lang, chrysanthemum, corn and so on.

Advantages of food dryers:
Easy to install and move, small occupied area, suitable for household and commercial use.
Energy-saving, environmental protection, less power consumption, can be used for a long time, long service life, low maintenance costs.
It is a safe and reliable semi-closed drying system.

Advantages of this product: 
1. Reasonable hot air circulation structure, a large centrifugal wind turbine to make heat flow uniform, large storage, and fast heating.
2. Using aluminum silicate fiber, the thermal insulation performance is significantly improved, thus reducing the power consumption.
3. Intelligent PID control can more accurately control and reflect the temperature, with timer and over-temperature alarm function.
4. Stainless steel inner and shelves, acid and alkali proof, corrosion resistance, door seal with high-temperature silica gel, durable and ensure food hygiene and safety during operation, easy to clean.

Notes: It can not be used as a kitchen oven, cannot be directly used in food production, can not bake inflammable and explosive goods.

评论

发表评论

此博客中的热门博文

What incubator should I use for fungi?

图片
There are many different types of incubators and the choice of the incubator should depend on what is being cultured. If the microorganism to be cultured is aerobic, then a normal incubator is sufficient; if it is anaerobic, then you need to buy an anaerobic incubator; if it is algae or fungi, it is better to have a light incubator. A light incubator is a piece of high-precision constant temperature equipment with light function; a light incubator is a special constant temperature incubation device for the cultivation of bacteria, molds, microorganisms, and breeding tests, especially practical for biological engineering, medical research, agriculture, and forestry science, aquaculture, animal husbandry and other fields engaged in scientific research and production use of the ideal equipment.　 The main technical parameters of the fungal incubator in the microbiology room of the laboratory require 1: Temperature requirements: 2 ~ 48 c, the temperature inside the incubator temperature u
阅读全文

Laminar flow Cabinet architecture introduction

图片
Laminar Flow Cabinet Clean Bench, also known as laminar flow Cabinet, can be mainly divided into two- person single, single side double side, horizontal vertical, etc. The structure is divided into the box, table, bracket, support foot, exhaust pipe, HEPA filter, pre-filter, etc.   Laminar flow cabinet design should have sufficient strength and stiffness, the weight should be light under the premise of good stability, the joints should be tight, according to the needs of the support foot can be self-locking structure universal wheel, but for the high requirements of seismic workbench without support feet and universal wheel, the operating area of the working surface can be made independent of the box platform. The inner surface of the single table is made of three sides of the wall. The wall surface is smooth and the joint is sealed. The glass and metal connection parts should also be sealed. The negative pressure air duct should be designed so that the air duct, plenum, filter, and su
阅读全文

The Control system is the core of the constant temperature and humidity chamber

图片
The Control system is the core of the constant temperature and humidity chamber , it determines the temperature rise rate of the text chamber, precision, and other important indicators. Now the controller of the test chamber mostly adopts PID control, but also a few adopts PID and fuzzy control phase combination control mode. Because the control system of the thermostatic oscillator basically belongs to the category of software, and this part in the use of the process, generally there will be no problems. In the constant temperature and humidity chamber refrigeration principle diagram, we introduced the temperature and humidity chamber refrigeration system several important components of the working path. So how do these components work? The refrigerant is adiabatically compressed to a higher pressure by the compressor, and the work is consumed to raise the exhaust temperature. After that, the refrigerant isothermally exchanges heat with the surrounding medium through the refrigerant c
阅读全文