Kentonchina introduces DZF series vacuum digital display oven for you

Designed for drying heat-sensitive, easily decomposable and easily oxidizable materials, the vacuum oven can flush inert gases into the interior, especially for complex ingredients. Among them, DZF series vacuum digital display drying oven is the most typical.


DZF series digital display vacuum drying oven is widely used in research fields such as biochemistry, chemical pharmacy, medical and health, agricultural research, environmental protection, etc., for powder drying, baking and disinfection and sterilization of various glass containers. It is especially suitable for fast and efficient drying of heat sensitive, easily decomposable, oxidizable substances and complex ingredients.

DZF series digital display vacuum drying oven has a streamlined arc design, the shell is made of cold-rolled steel plate, and the surface is electrostatically sprayed; the inner tank is divided into stainless steel or cold-rolled steel plate, semi-circular corners are easy to clean; control panel is adopted Microcomputer intelligent PID control with timing and over temperature alarm function;
The door is made of tempered and explosion-proof double-glazed doors.

Compared to conventional drying technology, DZF series digital vacuum drying oven has the following advantages:
◆The vacuum environment greatly reduces the boiling point of the liquid to be repelled, so vacuum drying can be easily applied to heat sensitive substances;
◆ For samples that are not easy to dry, such as powder or other granular samples, vacuum drying can effectively shorten the drying time;
◆Safer to use---- completely eliminate the possibility of oxide explosion in vacuum or inert conditions;
◆ Powdered samples are not blown or moved by flowing air compared to ordinary drying by air circulation.

At present, DZF series digital display vacuum drying ovens are roughly divided into: DZF-60 series, DZF-30 series and DZF-50 series.

DZF-60 series is the basic type, which is heated by both sides of the inner chamber; DZF-30 series is equipped with independent heating tubes for each layer, which can set different required temperature independently for each layer; DZF-50 series,inside its inner chamber,it has four faces of left,right,back and down to heat,and make the temperature heat transfer more uniform.
more:http://en.kentonchina.com/list/vacuum-oven.html 

评论

发表评论

此博客中的热门博文

What incubator should I use for fungi?

图片
There are many different types of incubators and the choice of the incubator should depend on what is being cultured. If the microorganism to be cultured is aerobic, then a normal incubator is sufficient; if it is anaerobic, then you need to buy an anaerobic incubator; if it is algae or fungi, it is better to have a light incubator. A light incubator is a piece of high-precision constant temperature equipment with light function; a light incubator is a special constant temperature incubation device for the cultivation of bacteria, molds, microorganisms, and breeding tests, especially practical for biological engineering, medical research, agriculture, and forestry science, aquaculture, animal husbandry and other fields engaged in scientific research and production use of the ideal equipment.　 The main technical parameters of the fungal incubator in the microbiology room of the laboratory require 1: Temperature requirements: 2 ~ 48 c, the temperature inside the incubator temperature u
阅读全文

Laminar flow Cabinet architecture introduction

图片
Laminar Flow Cabinet Clean Bench, also known as laminar flow Cabinet, can be mainly divided into two- person single, single side double side, horizontal vertical, etc. The structure is divided into the box, table, bracket, support foot, exhaust pipe, HEPA filter, pre-filter, etc.   Laminar flow cabinet design should have sufficient strength and stiffness, the weight should be light under the premise of good stability, the joints should be tight, according to the needs of the support foot can be self-locking structure universal wheel, but for the high requirements of seismic workbench without support feet and universal wheel, the operating area of the working surface can be made independent of the box platform. The inner surface of the single table is made of three sides of the wall. The wall surface is smooth and the joint is sealed. The glass and metal connection parts should also be sealed. The negative pressure air duct should be designed so that the air duct, plenum, filter, and su
阅读全文

The Control system is the core of the constant temperature and humidity chamber

图片
The Control system is the core of the constant temperature and humidity chamber , it determines the temperature rise rate of the text chamber, precision, and other important indicators. Now the controller of the test chamber mostly adopts PID control, but also a few adopts PID and fuzzy control phase combination control mode. Because the control system of the thermostatic oscillator basically belongs to the category of software, and this part in the use of the process, generally there will be no problems. In the constant temperature and humidity chamber refrigeration principle diagram, we introduced the temperature and humidity chamber refrigeration system several important components of the working path. So how do these components work? The refrigerant is adiabatically compressed to a higher pressure by the compressor, and the work is consumed to raise the exhaust temperature. After that, the refrigerant isothermally exchanges heat with the surrounding medium through the refrigerant c
阅读全文