What should we pay attention to when operating incubator with constant temperature and humidity

Constant temperature and humidity incubator has the function of controlling constant temperature and humidity. It is a laboratory equipment that can simulate various environmental conditions. It is a common equipment in scientific research and universities, such as environmental protection, sanitation and epidemic prevention, agriculture, livestock and aquatic products. It is also widely used in bioengineering, water analysis, performance testing of industrial products and other fields.

The outer surface of constant temperature and humidity incubator adopts magnetic door seal structure. Reasonable air duct circulation system is fully mixed and blown to the incubator body to ensure more precise temperature and better uniformity. At the same time, it also has intelligent PID control technology of micro-computer to keep temperature and humidity accurate and constant. Touch parameter setting button with timer and overtemperature alarm function. Our company Kangheng Instrument Laboratory Equipment Manufacturer is introducing the concept of green environmental protection, equipped with internationally renowned brand compressors, with delay protection function, running smoothly. The use of fluorine-free refrigerant R134 makes the system more energy-saving, efficient and healthy.

Detailed matters needing attention when operating incubator with constant temperature and humidity:

1. Do not use the machine if it is found to be damaged or deformed when unpacking.

2. In order to prevent electric shock or malfunction, please do not turn on the power supply until the installation and wiring are finished.

3. It is forbidden to disassemble, process, transform or repair equipment without authorization, otherwise there will be danger of abnormal action, electric shock or fire.

4. Please try not to open the door of incubator at work. Opening incubator at high temperature may cause burns to operators, and opening incubator at low temperature may cause frostbite to workers in the morning, and may cause freezing of evaporator, which will affect the refrigeration effect. If it must be opened, please do a good job of protection.

5. Please wipe the instrument with dry cloth. Do not use alcohol, gasoline or other organic solvents. Do not splash water on the instrument. If the instrument is immersed in water, stop using immediately. Otherwise, there is a risk of leakage, electric shock or fire. In order to avoid machine failure, please provide the power supply within the rated voltage range.

6. Safety should be fully considered before the operation of instrument, such as modification and setting, signal output, start-up and stop, etc. The wrong operation will damage or break down the working equipment. Check the terminal screw and fixing frame regularly. Do not use it in loose condition.

http://en.kentonchina.com

评论

发表评论

此博客中的热门博文

What incubator should I use for fungi?

图片
There are many different types of incubators and the choice of the incubator should depend on what is being cultured. If the microorganism to be cultured is aerobic, then a normal incubator is sufficient; if it is anaerobic, then you need to buy an anaerobic incubator; if it is algae or fungi, it is better to have a light incubator. A light incubator is a piece of high-precision constant temperature equipment with light function; a light incubator is a special constant temperature incubation device for the cultivation of bacteria, molds, microorganisms, and breeding tests, especially practical for biological engineering, medical research, agriculture, and forestry science, aquaculture, animal husbandry and other fields engaged in scientific research and production use of the ideal equipment.　 The main technical parameters of the fungal incubator in the microbiology room of the laboratory require 1: Temperature requirements: 2 ~ 48 c, the temperature inside the incubator temperature u
阅读全文

Laminar flow Cabinet architecture introduction

图片
Laminar Flow Cabinet Clean Bench, also known as laminar flow Cabinet, can be mainly divided into two- person single, single side double side, horizontal vertical, etc. The structure is divided into the box, table, bracket, support foot, exhaust pipe, HEPA filter, pre-filter, etc.   Laminar flow cabinet design should have sufficient strength and stiffness, the weight should be light under the premise of good stability, the joints should be tight, according to the needs of the support foot can be self-locking structure universal wheel, but for the high requirements of seismic workbench without support feet and universal wheel, the operating area of the working surface can be made independent of the box platform. The inner surface of the single table is made of three sides of the wall. The wall surface is smooth and the joint is sealed. The glass and metal connection parts should also be sealed. The negative pressure air duct should be designed so that the air duct, plenum, filter, and su
阅读全文

The Control system is the core of the constant temperature and humidity chamber

图片
The Control system is the core of the constant temperature and humidity chamber , it determines the temperature rise rate of the text chamber, precision, and other important indicators. Now the controller of the test chamber mostly adopts PID control, but also a few adopts PID and fuzzy control phase combination control mode. Because the control system of the thermostatic oscillator basically belongs to the category of software, and this part in the use of the process, generally there will be no problems. In the constant temperature and humidity chamber refrigeration principle diagram, we introduced the temperature and humidity chamber refrigeration system several important components of the working path. So how do these components work? The refrigerant is adiabatically compressed to a higher pressure by the compressor, and the work is consumed to raise the exhaust temperature. After that, the refrigerant isothermally exchanges heat with the surrounding medium through the refrigerant c
阅读全文