Cautions for Use of Class II Biosafety Cabinet

Biosafety cabinet is the main clean equipment of biological experiment. It can effectively prevent the harm of toxic and harmful air suspended particles to the experimental operators, so as to ensure the safety of operators and environment in the process of experiment.

When carrying out some high-risk experiments, biosafety cabinets need to be operated according to the specified instructions. Otherwise, it will lead to unsatisfactory use effect or danger, thus threatening the personal safety of operators and environmental pollution. Generally speaking, our operators need to read the instructions for the use of biosafety cabinets in detail before using biosafety cabinets. Only in this way can we ensure that there will be no errors in the use process, if the experienced operator teaches, it will greatly increase the safety of the experiment.

Secondly, when choosing biosafety cabinets, we also need to choose products with national security certification. If there are a variety of certification services, the effect will be better. At the same time, in the process of using, professional personnel are required to carry out relevant testing at intervals to ensure that it can continue to use. If it does not meet the relevant requirements, it should be replaced in time, otherwise there will be unnecessary danger to operators.

When using the biosafety cabinet, it is also necessary to clean and disinfect in time, because there will be some residual microorganisms after the experiment, if not disinfected and cleaned, then these microorganisms may affect the use of the biosafety cabinet and the next experiment. Therefore, after the completion of the experiment, it is necessary to carry out timely cleaning and disinfection, which can not only ensure the stability of the experiment, but also ensure the life of the biosafety cabinet.

Normally, biosafety cabinets will have alarms, which is also to ensure the safety of the use process as much as possible and to meet the relevant experimental needs, so operators can according to their own needs when purchasing laboratory equipment manufacturers put forward relevant requirements for installation into biosafety cabinets.

http://en.kentonchina.com

评论

发表评论

此博客中的热门博文

What incubator should I use for fungi?

图片
There are many different types of incubators and the choice of the incubator should depend on what is being cultured. If the microorganism to be cultured is aerobic, then a normal incubator is sufficient; if it is anaerobic, then you need to buy an anaerobic incubator; if it is algae or fungi, it is better to have a light incubator. A light incubator is a piece of high-precision constant temperature equipment with light function; a light incubator is a special constant temperature incubation device for the cultivation of bacteria, molds, microorganisms, and breeding tests, especially practical for biological engineering, medical research, agriculture, and forestry science, aquaculture, animal husbandry and other fields engaged in scientific research and production use of the ideal equipment.　 The main technical parameters of the fungal incubator in the microbiology room of the laboratory require 1: Temperature requirements: 2 ~ 48 c, the temperature inside the incubator temperature u
阅读全文

Laminar flow Cabinet architecture introduction

图片
Laminar Flow Cabinet Clean Bench, also known as laminar flow Cabinet, can be mainly divided into two- person single, single side double side, horizontal vertical, etc. The structure is divided into the box, table, bracket, support foot, exhaust pipe, HEPA filter, pre-filter, etc.   Laminar flow cabinet design should have sufficient strength and stiffness, the weight should be light under the premise of good stability, the joints should be tight, according to the needs of the support foot can be self-locking structure universal wheel, but for the high requirements of seismic workbench without support feet and universal wheel, the operating area of the working surface can be made independent of the box platform. The inner surface of the single table is made of three sides of the wall. The wall surface is smooth and the joint is sealed. The glass and metal connection parts should also be sealed. The negative pressure air duct should be designed so that the air duct, plenum, filter, and su
阅读全文

The Control system is the core of the constant temperature and humidity chamber

图片
The Control system is the core of the constant temperature and humidity chamber , it determines the temperature rise rate of the text chamber, precision, and other important indicators. Now the controller of the test chamber mostly adopts PID control, but also a few adopts PID and fuzzy control phase combination control mode. Because the control system of the thermostatic oscillator basically belongs to the category of software, and this part in the use of the process, generally there will be no problems. In the constant temperature and humidity chamber refrigeration principle diagram, we introduced the temperature and humidity chamber refrigeration system several important components of the working path. So how do these components work? The refrigerant is adiabatically compressed to a higher pressure by the compressor, and the work is consumed to raise the exhaust temperature. After that, the refrigerant isothermally exchanges heat with the surrounding medium through the refrigerant c
阅读全文